Asked By: Cyrus Lewis Date: created: Aug 08 2021

Is 9 ft ceilings worth the money

Answered By: Jaden Diaz Date: created: Aug 09 2021

If you are indifferent about it, then you could consider resale value.

The 9 ft.

ceilings are usual now and most people greatly prefer them.

Some custom builders consider 9 ft..

Asked By: Julian Green Date: created: May 30 2021

Is 7 ft ceiling too low

Answered By: Ryan Rodriguez Date: created: Jun 01 2021

It all depends in the area. In old row homes, you may get low ceiling cause people dropped the height to avoid taking out the old work. Min 8ft is good but for narrow home, you may get away with 7.5′.

Asked By: Carter Kelly Date: created: Dec 22 2021

How tall is a two story house in M

Answered By: Hunter Green Date: created: Dec 22 2021

The minimum height needed for a two storey contemporary building is 6.5 metres and the minimum requirement for a three storey of similar design could be contained in less than 9.5 metres.

Asked By: David Coleman Date: created: Jul 23 2021

What is the normal height of a house

Answered By: Caleb Carter Date: created: Jul 24 2021

Today’s standard ceiling height is nine feet. Newer houses are often built with nine-foot ceilings on the first floor (and, sometimes, eight-foot ceilings on the second story). While many custom builders will assume that homeowners want nine-foot ceilings, don’t take it for granted.

Asked By: Matthew Cooper Date: created: Nov 29 2021

Are 10 ft ceilings good

Answered By: Benjamin Gray Date: created: Nov 30 2021

Newer homes, meanwhile, tend to come with nine-foot ceilings. But anything above the nine-foot mark is generally considered a high ceiling. You might, for example, find a house with rooms that feature 10-foot ceilings. Or, you might find a home with a single room with a much higher ceiling than that.

Asked By: Ronald Washington Date: created: Nov 24 2021

How tall is a 40 story building

Answered By: Roger Robinson Date: created: Nov 27 2021

404 feet tallHow tall is a 40 story building? — They’re 404 feet tall. To get “40 stories tall,” Pelton figures on 10 feet per story, which is probably too little.

Asked By: Horace Lopez Date: created: Feb 23 2021

How tall is an 8 story building

Answered By: Tyler Flores Date: created: Feb 25 2021

The height of each storey= ceiling height of the rooms plus the thickness of the floors between each pane. Generally this is around 10 feet (3- 3.1 m) total. However, it can vary. So, 7 storey = 7*10 = 70 feet ( 21 metres approx.)

Asked By: Noah Jenkins Date: created: Nov 04 2021

How tall is a 3 story building

Answered By: Abraham Powell Date: created: Nov 06 2021

A three story building will most likely be in a range of 33 to 40 feet. A building with 14 foot ceilings heights on the first floor (for retail use) and two floors of residential or office with 9 foot ceilings above would probably be somewhere in the neighborhood of 36 feet tall, give or take a few feet.

Asked By: Carter Bryant Date: created: Mar 24 2022

How tall is a 1 story house

Answered By: Landon Price Date: created: Mar 25 2022

about 15 feetOne story is about 15 feet (4.5 meters), including floor and ceiling structure and the headspace of the rooms. For a multiple-story building, estimate about 13 feet per floor, because one man’s ceiling is another man’s floor.

Asked By: Jake Cox Date: created: Jun 17 2022

What height is considered a low ceiling

Answered By: Juan Patterson Date: created: Jun 17 2022

eight feetWhat Is Considered Low Ceiling Height? For residential rooms such as bedrooms, living rooms, kitchens, hallways, or offices, anything less than eight feet is low. A seven-foot-high ceiling makes the space feel cramped and crowded.

Asked By: Jaden Reed Date: created: Jun 20 2022

How tall is a 4 story house

Answered By: Gabriel Williams Date: created: Jun 23 2022

A story in regards to a building is usually ten feet tall. So four stories would be 40 feet tall, which in meters, would be a little over 12 meters (specifically 12.192 meters). So a building with four floors/stories, would be a little over 1200 centimeters, or twelve point two meters, tall.

Asked By: Colin Diaz Date: created: Apr 09 2021

How tall is a 2 story house in feet

Answered By: Simon Edwards Date: created: Apr 11 2021

In the US, the standard two-story building height for residential buildings is between 18 to 20 feet. This is considered normal and comfortable as it allows for provides aesthetic space. This means a floor could be 9 feet high while the corresponding second floor could be 10 feet.

Asked By: John Ward Date: created: Mar 29 2021

What is a comfortable ceiling height

Answered By: Alan Russell Date: created: Mar 29 2021

Personally, I find 3 to 3.5 meters (9.8 to 11.5 feet) to be a very comfortable ceiling height. It gives plenty of headroom for creative processes but is not so tall that it hikes up heating or cooling costs to unreasonable levels. I wasn’t brought up in a house with high ceilings.

Asked By: Juan Turner Date: created: Jun 25 2022

Are higher ceilings better

Answered By: Caleb Gonzalez Date: created: Jun 28 2022

Improved Creativity and Problem Solving Research over the years has shown that a high ceiling, despite a lack of sunlight, improved participants’ creativity. A person can think more abstractly and has a greater sense of freedom as opposed to confinement. In turn, higher ceilings also encouraged problem-solving skills.

Asked By: Gregory Sanders Date: created: May 23 2021

How can I make my 8 foot ceilings look higher

Answered By: Francis Sanchez Date: created: May 26 2021

Luckily there are a number of tricks you can do to make them appear taller than they really are!Use Recessed Lighting. … Skip Crown Molding. … Paint the Ceiling White. … Use High- Gloss. … Let the Ceiling Color Creep. … Go for Vertical Wall Details. … Hang Décor Higher. … Use Low Furniture.

Asked By: Horace Brown Date: created: Jun 15 2022

How tall is a two story house with attic

Answered By: Chase Adams Date: created: Jun 16 2022

According to most code requirements, an average attic requires a ceiling height of minimum 7.5 feet over 50% of the floor area. So, considering this a 2-story house with attic space will be about 25.5 feet tall.

Asked By: Landon Gonzalez Date: created: Feb 22 2021

How tall is a 2 story house with roof

Answered By: Jacob Turner Date: created: Feb 22 2021

between 20 to 25 feetIn general, we consider, the standard height of two-story home is 25 ft. from the ground to roof crest. Most of the 2- story houses have height between 20 to 25 feet. So, what length ladder is perfect for ensuring that you can reach this height safely?

Asked By: Cole Cook Date: created: Jan 01 2022

Is 8 foot ceiling too low

Answered By: Antonio Richardson Date: created: Jan 02 2022

While 8 feet is still a standard, having higher ceilings than that means using more material and hence a higher price.

Related Question Answers

Bryan Coleman

Professional

Quick Answer: How Many Rolex Submariners Made Per Year?

800,000.The number of watches produced at Rolex every year (which is only known because Rolex has its movements certified by the official Swiss chronometer control center, COSC, and their numbers are public). Why are Rolex Submariners so expensive? The materials are very expensive. Rolex, for example, tends to use 904L steel which is leagues ahead of even most luxury market equivalents. They tend to use 316L steel. This makes them harder, shinier and also more expensive by default. Do Rolex keep their value? As they say in the business, most watches are like new cars and depreciate the minute you strap them on your wrist. But is this the case with every watch brand? Thankfully, no. Ask if Rolex watches can hold their value or even appreciate down the line and the answer is yes. What year did Rolex Submariner change? The Rolex Submariner 16610 was first introduced in 1989…

David Patterson

Professional

Can You Paint Over Dried Paint?

How do you paint over already painted metal? Spray paint metal surfaces that have already been painted by first preparing the project, following these steps:Remove loose rust with a wire brush, sandpaper or chemical rust remover.Lightly sand the metal surface.Remove dust with a tack cloth.. How do you paint over peeling paint? Prep the Area. Old paint can chip, flake or peel, leaving behind cracks and small holes. ... Remove Peeling Paint. If you try to paint over peeling paint, you will not have a smooth, professional finish. ... Patch the Wall. ... Sand Patched Areas. ... Clean and Apply Primer. ... Wait until the primer is completely dry before repainting. What happens if you don't use primer before painting? Because it has a glue-like base, drywall primer helps the paint adhere properly. If you skip priming, you risk peeling paint, especially in humid conditions. Moreover, the lack of adhesion…

Joseph Reed

Professional

How Long Do Ceramic Pans Last?

3 to 5 years Do ceramic pans need to be seasoned? Generally, ceramic cookware doesn't require seasoning. However, some products come with the instruction/recommendation to season the cookware prior to first use, and to re-season it about twice a year to revitalize ceramic non-stick surface. Make sure to rinse and dry your cookware before seasoning. How long do non stick pans last? three to five years Is ceramic cookware better than Teflon? In terms of ceramic vs Teflon cookware, the main difference lies in the composition of the non stick coating. Teflon is known to emit toxic fumes when it is heated up to a certain temperature. Ceramic coating, on the other hand, tends to be lead, cadmium, PFOA and PTFE free. Which is better ceramic or granite cookware? Today granite cookware and granite pans are made with a stainless steel core and topped with a glass coating. Most granite…

Harry Martinez

Professional

Question: Is Ceramic Harder Than Glass?

In theory, ceramic is stronger than glass.Glass is actually a type of ceramic, but to be specific, glass has no ordered molecular structure.Most modern ceramics have a crystalline molecular structure.Typically ceramic is stronger than glass of the same thickness, and more resistance to heat and thermal changes.3 Feb 2016 Is ceramic more durable than glass? Ceramic is lighter than glass, but usually because it is porous. One of the big benefits of ceramic over class is that ceramic is a good thermal insulator due to its porosity.6 Nov 2009 What's the difference between glass and ceramic? In the manufacture of both glass and ceramics, there is a slight difference. A glass kiln will have heating elements on the top whereas a ceramic kiln will have heating elements on the sides. Glass is known to be non-crystalline. Ceramics may be crystalline or partly crystalline.11 Jun 2017 Is ceramic easily breakable? Ceramics…

Devin Hayes

Professional

Question: Are Ceramic Watches Good?

Apart from being scratch resistant, high-tech watch ceramic is very lightweight, heat-resistant and anti-allergic.Its sleek surface offers a unique feel on the wrist that is both cool and smooth.This is a highly time intensive manufacturing method which makes high-tech watch ceramic so valuable. Why ceramic watches are expensive? Machining is generally very hard to do for most ceramics. The raw materials to make ceramic parts is cheap, but the process to make them is expensive. Metals are often the other way around, with precious metal materials being expensive, but the process used to machine them being less expensive. Does ceramic watch break easily? Potentially Brittle While ceramic is extremely durable and can resist scratches and common damages, due to the molecular structure it is not resistant to shattering. If a ceramic case falls onto a hard surface from a few feet or more, there is a good chance that it…

Michael Hernandez

Guest

Quick Answer: Does Gold Scratch Easily?

Despite being stronger and more durable, platinum is a softer metal than 14k gold.This means it will get scratched a little easier than 14k gold would.However, an important thing to note is when gold is scratched, the gold is lost and it looks like a scratch. Does 10k gold scratch easily? As a result of its hardness, 10K gold jewelry is very durable, relatively speaking. In comparison, alloys such as 18K or 20K gold scratch much more easily, and jewelry made with them is easier to bend. Click here to see an extensive selection of 10K gold jewelry. Does 18k gold scratch easily? You won't usually find gold rings beyond 18K because they tend to get scratches and deformations way too easily. Obviously, 18K gold is the most expensive, but it's also the one that's least likely to tarnish. It is, however, more prone to being affected by every-day use…

Joshua Carter

Guest

Question: Does Rolex Scratch Easily?

Unlike other highly mechanical, high-end watches, Rolex is designed to take everyday beating, watch case, crystal and all.Scratches and wristwatches are a fact of life.Rolex gold, platinum, and 904L stainless steel does scratch with day-to-day use. Are Rolex scratch resistant? Without question, Rolex watches are know for being one of the most durable mechanical timepieces made. Rolex utilizes 904L stainless steel that is highly polishable and scratch resistant, but scratches do happen. Does Rolex face scratch? Acrylic has its advantages. It is very durable, easily resisting bangs. However, it is not scratch resistant, thus those bangs can still leave a mark. Rolex used acrylic in their watches, but slowly began introducing a synthetic sapphire replacement similar to the one in the image above. How do I prevent scratches on my watch? 0:41 1:28 Suggested clip · 40 seconds How To Stop Scratching Up Your Watch !! - YouTube YouTube Start…

Angel Phillips

Guest

Question: Is Glass Harder Than Ceramic?

In theory, ceramic is stronger than glass.Glass is actually a type of ceramic, but to be specific, glass has no ordered molecular structure.Most modern ceramics have a crystalline molecular structure.Typically ceramic is stronger than glass of the same thickness, and more resistance to heat and thermal changes. Is Glass considered a ceramic? A ceramic material is an inorganic, non-metallic, often crystalline oxide, nitride or carbide material. Some elements, such as carbon or silicon, may be considered ceramics. Glass is often not considered a ceramic because of its amorphous (noncrystalline) character. Is ceramic easily breakable? Ceramics are brittle because they're loaded with irregularly distributed pores. Some ceramics, like bricks, have large pores. “The larger the pore, the easier it is to break,” Greer says. If you've ever broken a ceramic vase or some such, the break probably originated at a pore. What is the hardest ceramic? The technical properties of silicon…

Angel Morris

Guest

Question: Does Ceramic Break Easily?

The rub with ceramics is that, while they're tough to scratch, they're* *more prone to cracking compared to metal.Some ceramics, like bricks, have large pores.“The larger the pore, the easier it is to break,” Greer says.If you've ever broken a ceramic vase or some such, the break probably originated at a pore. Does ceramic watch break easily? Potentially Brittle While ceramic is extremely durable and can resist scratches and common damages, due to the molecular structure it is not resistant to shattering. If a ceramic case falls onto a hard surface from a few feet or more, there is a good chance that it may shatter. Why do ceramics break easily? But, in ceramics, due to the combined ionic and covalent bonding mechanism, the particles cannot shift easily. The ceramic breaks when too much force is applied, and the work done in breaking the bonds creates new surfaces upon cracking.…

Oswald Rodriguez

Guest

Quick Answer: What Is A Rolex Hulk?

Rolex Hulk Nickname Origin: Introduced in 2010 to commemorate the 60th anniversary of Rolex's legendary dive watch, the "Hulk" marks the first time in Rolex history that the Submariner has been offered with any dial color other than black or blue. What is a Rolex Kermit? Presenting the 50th Anniversary Rolex Submariner 16610LV, also known as the Kermit Rolex watch. The Kermit Rolex model is a Rolex Green Submariner that was released in 2003, in celebration of the Rolex Submariner's 50th Anniversary. Is it worth buying a Rolex? So in short, yes, a rolex can be worth it. Remember its not an investment. If you want your $9000 to grow steadily in value then you are far better off finding some good long term growth shares with healthy dividend returns etc. Rolex is not an appreciating asset unless you are buying a rare antique. Why are Rolex Submariners so expensive?…

John King

Professor

Quick Answer: Why Are Rolex So Expensive?

The materials are very expensive.Rolex, for example, tends to use 904L steel which is leagues ahead of even most luxury market equivalents.They tend to use 316L steel.This makes them harder, shinier and also more expensive by default. Is buying a Rolex worth it? So in short, yes, a rolex can be worth it. Remember its not an investment. If you want your $9000 to grow steadily in value then you are far better off finding some good long term growth shares with healthy dividend returns etc. Rolex is not an appreciating asset unless you are buying a rare antique. Why are watches so expensive? Some have a price tag which can seem high, but which is justified for a number of reasons. Generally speaking, because of the nature of their movements, mechanical watches are more expensive than quartz watches. The production of quartz or mechanical movements is at the cutting-edge…

Malcolm Cooper

Professor

Question: Is Ceramic Scratch Resistant?

The ceramic retains the color and is scratch-resistant; this means the bezel will always keep its “brand new” look.Ceramic is one of the hardest class of materials known meaning that engineering the material is extremely hard.On the other hand, because it is so tough, it's difficult to scratch. Does ceramic break easily? Ceramics are brittle because they're loaded with irregularly distributed pores. Some ceramics, like bricks, have large pores. “The larger the pore, the easier it is to break,” Greer says. If you've ever broken a ceramic vase or some such, the break probably originated at a pore. Is ceramic expensive? Machining is generally very hard to do for most ceramics. It is perfectly normal that a ceramic case is more expensive than a steel or even titanium case. However, it will not likely exceed the cost of a gold or platinum case, as the materials used are not that…

Douglas Henderson

Professor

Quick Answer: How Durable Is A Ceramic Watch?

Apart from being scratch resistant, high-tech watch ceramic is very lightweight, heat-resistant and anti-allergic.Its sleek surface offers a unique feel on the wrist that is both cool and smooth.Ceramic watches are durable and very versatile in shiny metallic colours with smooth or ornate surfaces. Why is ceramic watch so expensive? Machining is generally very hard to do for most ceramics. The raw materials to make ceramic parts is cheap, but the process to make them is expensive. Metals are often the other way around, with precious metal materials being expensive, but the process used to machine them being less expensive. Does ceramic break easily? Ceramics are brittle because they're loaded with irregularly distributed pores. Some ceramics, like bricks, have large pores. “The larger the pore, the easier it is to break,” Greer says. If you've ever broken a ceramic vase or some such, the break probably originated at a pore.…

Devin Brown

Professor

Quick Answer: Are Ceramics Expensive?

How do you price ceramics? Suggested clip · 55 seconds How to PRICE your pottery..or ANYTHING!!!!- YouTube YouTube Start of suggested clip End of suggested clip Is ceramic expensive? Machining is generally very hard to do for most ceramics. It is perfectly normal that a ceramic case is more expensive than a steel or even titanium case. However, it will not likely exceed the cost of a gold or platinum case, as the materials used are not that precious. How much does a pottery class cost? General Cost Lessons in pottery vary in cost between the level of tuition you require and the standard of the teaching, and also the location. For a basic beginners lesson you can expect to pay between $10 and $30, usually as part of a longer course. What is the difference between pottery and ceramics? With this you will definitely distinguish the difference between the…

Howard Torres

Professor

Quick Answer: Is Ceramic Stronger Than Steel?

Strength (1) A material's hardness is determined by measuring the size of an indentation made by a sharp diamond pressed strongly onto a material specimen.The hardness of alumina ceramics is nearly three times that of stainless steel; silicon carbide is more than four times harder than stainless steel. Is ceramic strong? A ceramic material is an inorganic, non-metallic, often crystalline oxide, nitride or carbide material. Some elements, such as carbon or silicon, may be considered ceramics. Ceramic materials are brittle, hard, strong in compression, and weak in shearing and tension. What is the strongest type of steel? What Is the Strongest Non-Alloy Metal in the World? Tungsten has the highest tensile strength of any natural metal, but it's brittle and tends to shatter on impact.Titanium has a tensile strength of 63,000 PSI. Chromium, on the Mohs scale for hardness, is the hardest metal around. Are ceramics tougher than metals? The…

Herbert Hayes

User

Quick Answer: Is Ceramic Breakable?

Ceramic and porcelain are two materials that are strong and smooth, but breakable.It is a type of ceramic, but its clay makes it denser and more durable.Its clay is white and very refined.Though the two are very similar, porcelain tends to be more expensive than ceramic. Is ceramic easily breakable? Ceramics are brittle because they're loaded with irregularly distributed pores. Some ceramics, like bricks, have large pores. “The larger the pore, the easier it is to break,” Greer says. If you've ever broken a ceramic vase or some such, the break probably originated at a pore. Is ceramic strong? A ceramic material is an inorganic, non-metallic, often crystalline oxide, nitride or carbide material. Some elements, such as carbon or silicon, may be considered ceramics. Ceramic materials are brittle, hard, strong in compression, and weak in shearing and tension. Are ceramics brittle? The two most common chemical bonds for ceramic materials…

Oliver Jones

User

Quick Answer: Can Ceramic Scratch Metal?

Ceramics, on the other hand, are virtually scratch-proof.Unlike an aluminum or a stainless steel case, a ceramic one can take a licking and keep on ticking.The rub with ceramics is that, while they're tough to scratch, they're* *more prone to cracking compared to metal. Can you scratch ceramic? The ceramic retains the color and is scratch-resistant; this means the bezel will always keep its “brand new” look. Ceramic is one of the hardest class of materials known meaning that engineering the material is extremely hard. On the other hand, because it is so tough, it's difficult to scratch. Is ceramic harder than steel? A material's hardness is determined by measuring the size of an indentation made by a sharp diamond pressed strongly onto a material specimen. The hardness of alumina ceramics is nearly three times that of stainless steel; silicon carbide is more than four times harder than stainless steel.…

Joseph Cook

User

Question: Are Ceramic Bezels Scratch Proof?

The ceramic retains the color and is scratch-resistant; this means the bezel will always keep its “brand new” look. How durable is a ceramic watch? High-tech ceramic is really a material with unique properties. Apart from being scratch resistant, high-tech watch ceramic is very lightweight, heat-resistant and anti-allergic. Ceramic watches are durable and very versatile in shiny metallic colours with smooth or ornate surfaces. Can Rolex face scratch? Acrylic has its advantages. It is very durable, easily resisting bangs. However, it is not scratch resistant, thus those bangs can still leave a mark. As you can see from the image above, an acrylic crystal can gather many scratches, especially one worn often. Why are ceramic watches so expensive? Machining is generally very hard to do for most ceramics. The raw materials to make ceramic parts is cheap, but the process to make them is expensive. Metals are often the other…

Simon Thompson

User

Quick Answer: Can Rolex Face Scratch?

How do I prevent scratches on my watch? 0:41 1:28 Suggested clip · 40 seconds How To Stop Scratching Up Your Watch !!- YouTube YouTube Start of suggested clip End of suggested clip Can scratches on stainless steel watch be buffed? Continue to rub the scratches until they disappear. Apply more metal polish to the pad or cloth as needed. When you're done with one area, move down the watch band to the next section. When you're finished, use a clean cloth to buff the stainless steel to a shine. What is the face of a Rolex made of? Steel comes in various types and grades and most steel watches are made from a type of stainless steel called 316L. Today, all the steel in Rolex watches is made from 904L steel, and as far as we know, pretty much no one else does. Is it possible to scratch sapphire…

Anthony Perry

User

Is Ceramic Harder Than Stainless Steel?

Strength (1) The hardness of alumina ceramics is nearly three times that of stainless steel; silicon carbide is more than four times harder than stainless steel.This extreme hardness is one of many unique properties that makes Fine Ceramics "super materials" for modern technology. Are ceramic knives better than metal? The blade is sharpened so thin that anything hard may chip your ceramic knife. The knife you choose will come down to your own needs; ceramic knives are not as versatile as steel and they do not make a good all-purpose knife, however, they are excellent at slicing fruits and vegetables thinly. Is ceramic harder than titanium? Tungsten is about 10 times harder than 18K Gold, 5 times harder than tool steel, and 4 times harder than titanium. Tungsten measures between 8 and 9 on the Mohs hardness scale. (Diamonds are a 10 - the highest.) Tungsten, though very hard, is…